HACKINTOSH.ORG | Macintosh discussion forums

Macintosh Operating System Discussions => OS X => Topic started by: bgreen on January 02, 2010, 01:00:28 am



Title: First Basic Hackintosh Build
Post by: bgreen on January 02, 2010, 01:00:28 am
Hi

I am wanting to build a first basic hackintosh with Snow leopard.  Could you please advise if the following build that works on the earlier operating system (Leopard)will work with Snow leopard.



Foxconn 45CSX mini-ITX motherboard
Intel Atom 330 processor (dual-core, 2x1.6Ghz)
Intel 945GC+ICH7 chipset
Intel GMA950 graphics chip
Realtek ALC662 audio chip
Realtek RTL8100C ethernet chip
2GB of DDR2 RAM
160GB SATA hard drive
SATA DVD drive

Using the earlier leopard software the instructions were to utilize The Intel D945GCLF2_ISO boot-132 package.  Would this work or is there an updated package for snow leopard?


If this is workable what would be the additional software i would need and recommended process to undertake?  I have a registered copy of Snow leopard.

Thanks very much for your help.
Regards Bruce


Title: Re: First Basic Hackintosh Build
Post by: richdave on January 11, 2010, 12:15:20 pm
I cant give definitive advice and am only just venturing to build my own hackintosh but this article may be of interest as it uses the same MoBo as yours..

http://www.theinquirer.net/inquirer/news/1137487/bloke-builds-hackintosh (http://www.theinquirer.net/inquirer/news/1137487/bloke-builds-hackintosh)

THis may also be of interest

http://www.lifehacker.com.au/2009/09/install-snow-leopard-on-your-hackintosh-pc-no-hacking-required/ (http://www.lifehacker.com.au/2009/09/install-snow-leopard-on-your-hackintosh-pc-no-hacking-required/)

Also this article

Quote
However, the Snow Leopard upgrade DVD does not require that you have Leopard installed; it?s a full install disc that works on any Intel Mac. Similarly, as with every version of Mac OS X, Snow Leopard does not require activation or a registration code; Apple continues to rely on the honor system. This is great for Leopard users, as it makes it much easier to install Snow Leopard on your Mac without having to jump through hoops; for example, if you decide to erase your hard drive before installing Snow Leopard, you don?t have to first install Leopard.

http://www.macworld.com/article/142454/2009/08/install_snow_leopard.html (http://www.macworld.com/article/142454/2009/08/install_snow_leopard.html)


Title: Re: First Basic Hackintosh Build
Post by: bgreen on January 12, 2010, 07:37:40 am
Hi

Thanks for the advise... will keep you posted..cheers


Title: Re: First Basic Hackintosh Build
Post by: richdave on January 30, 2010, 10:52:51 am
any news on your build?

I have not yet started mine...  just got the 16G flash drive and the Sl DVD in the maill so will hopefully start soon


Title: Re: First Basic Hackintosh Build
Post by: bgreen on January 30, 2010, 07:09:04 pm
Hi

That was good timing... i put the parts together yesterday.  I followed the guide easily until i got to the part of the guide DSDT quick guide:

Then i am not sure quite what happened.  I would suggest if its possible that some more clarification could go into this part of the guide... everything else is great.  I had difficulty locating the example files for comparison and also on the editing everything was going fine till i tried to find the file Azalia.... i could not locate.

Result:

I have a self booting Snow Leopard with the following problems that i am trying to sort... any help would be great.

No Sound
No Ethernet
Dont think sleep is working either
DVD will read data, music and copy files etc... however will not play DVD movies.

At start up i also get following errors:

Post error occurs.... it gives me options of last boots.  If i do nothing it defaults to the last good boot and its fine.

Then i get an icon of Snow Leopard disk with message.... press any key to choose start up ... if i do nothing it starts automatically and is fine.

Sometimes the CPU speed shows at 2.4 and sometimes 2.8.  It is a 2.8 CPU. 

Despite all this i have managed to load Photoshop CS3 and it works.  The system once up and running appears stable.

So any suggestions would be great....... is it possible to tweak this to get everything working or best to try a clean reinstall.

Thanks.... Bruce learning lots..... need to learn more.........having fun!


Title: Re: First Basic Hackintosh Build
Post by: bgreen on January 30, 2010, 07:24:02 pm
Please note additional to last post:

New Specs for my machiine:

Gigabyte G31M-ES2L
intel core 2 Duo 6700 2.8
ASUS 8400GS 512M DDR2 Graphics card
SATA DVD writer
2gb Ram
1 TB SATA Hard Drive

Used install guide found at following link:

http://www.infinitemac.com/f57/guide-retail-snow-leopard-dvd-install-for-g31m-t3672/

I hope that makes more sense... cheers