Pages: [1]   Go Down
  Print  
Author Topic: can anyone help me to install MAC OS X on this pc ?  (Read 4250 times)
SalmanKhan29
Newbie
*
Posts: 1


« on: November 02, 2010, 04:41:44 pm »

Hi everyone. I have this motherboard :

MSI K9N6PGM2-V Socket AM2 mATX Motherboard MS-7309-090, NVIDIA MCP61 Chipset, Supports Socket AM2 CPUs, Dual DDR2 800, SATA II RAID. OEM.

    * CPU:
      - Support socket AM2 for AMD Athlon 64 / Athlon 64X2 CPU
      - Support socket AM2+ for AMD Phenom CPU
    * FSB: AM2 CPU supports HyperTransport 1.0/2.0 supporting speed up to 1000MHz
    * Chipset: NVIDIA GeForce 6100 nForce430 (MCP61 P/S/V)
    * Memory:
      - Supports Dual DDR2 533/667/800
      - 2 DDRII DIMMs (240pin / 1.8V)
      - Supports a maximum memory size up to 4GB
    * Slots:
      - One PCI Express X16
      - One PCI Express X1 slot
      - Two PCI slots, support 3.3V/5V PCI bus interface
    * On-Board IDE/SATA:
      One IDE port by NVIDIA MCP61 (P/S/V)
      - Supports Ultra DMA 66/100/133 mode
      - Supports PIO, Bus Master operation mode
      - Can connect up to two IDE devices
      Two SATA II ports by NVIDIA MCP61 (P/S/V)
      - Supports storage and data transfers at up to 3Gb/s
      - SATAII 1~2 support RAID 0, 1 mode by NVIDIA MCP61 (P/S/V)
    * Audio: Chipset integrated by Realtek ALC861/883/888
      - Flexible 8-channel audio with jack sensing
      - Compliant with Azalia 1.0 Spec
    * LAN: Supports 10/100 Fast Ethernet by Realtek 8201CL
    * Internal I/O Connector:
      - 2 x SATA II connectors
      - 1 x ATA133 connectors
      - 2 x USB 2.0 connector support additional 4 ports
      - SPDIF-Out connector
      - Front panel connector
      - Front panel audio connector
      - Chassis intrusion switch connector
      - Clear CMOS Jumper
    * Back Panel I/O Ports:
      - 1 x Parallel
      - 1 x PS/2 Keyboard
      - 1 x PS/2 Mouse
      - 1 x VGA port
      - 1 x 6 in 1 audio jack
      - 4 x USB 2.0
      - 1 x RJ45 LAN Jack
    * Dimensions: 9.6 in (L) x 8.1 in(W) Micro-ATX Form Factor


Well I want to install MAC OS on this pc,but it is not working.It always crashed my windows 7.

Mac Os is using something like that >> S3 whereas Windows 7 is using S1 in BIOS config.

So anyone can help me what I can do.And tell me which version of MAC OS will work best on it.


Thanks.
Logged
arashcnema
Newbie
*
Posts: 3


« Reply #1 on: November 14, 2010, 08:09:54 pm »

u must to have two hard disk . one for win 7 & one for mac .
in startup press f10 for choose your os .
try every version of mac for find one version of mac that work on your pc

 I try mac osx 10.6.3 - 10.6.2 - 10.5.2 but just 10.5.6 worked on my pc
Logged
Pages: [1]   Go Up
  Print  
 
Jump to: