Title: my pc 4,dualcore with leopard 10.5.7 Post by: rock4u on March 02, 2010, 12:12:48 pm Chipset Model: Graphics by NVIDIA
Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0601 Revision ID: 0x00a2 ROM Revision: NVinject 0.2.1 Displays: X193W: Resolution: 1440 x 900 @ 60 Hz Depth: 32-Bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No Display Connected ECC: Disabled BANK0/DIMM0: Size: 2 GB Type: DDR2 SDRAM Speed: 667 MHz Status: OK Manufacturer: Apple Inc. Part Number: ABCDEFGHIJ Serial Number: 1234567890 BANK1/DIMM1: Size: Empty Type: Empty Speed: Empty Status: Empty Manufacturer: Empty Part Number: Empty Serial Number: Empty BANK2/DIMM2: Size: 1 GB Type: DDR2 SDRAM Speed: 667 MHz Status: OK Manufacturer: Apple Inc. Part Number: ABCDEFGHIJ Serial Number: 1234567890 BANK3/DIMM3: Size: 1 GB Type: DDR2 SDRAM Speed: 667 MHz Status: OK Manufacturer: Apple Inc. Part Number: ABCDEFGHIJ Serial Number: 1234567890 Vendor: Unknown Product: AHCI Standard Controller Speed: 3 Gigabit Description: AHCI Version 1.10 Supported WDC WD1600AAJS-00PSA0: Capacity: 149.05 GB Model: WDC WD1600AAJS-00PSA0 Revision: 05.06H05 Serial Number: WD-WCAP93908662 Native Command Queuing: Yes Queue Depth: 32 Removable Media: Yes Detachable Drive: No BSD Name: disk1 Mac OS 9 Drivers: No Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Verified Volumes: mac: Capacity: 74.65 GB Available: 15.67 GB Writable: Yes File System: Journaled HFS+ BSD Name: disk1s1 Mount Point: / |