HACKINTOSH.ORG | Macintosh discussion forums

Macintosh Operating System Discussions => OS X => Topic started by: shedo on April 17, 2011, 12:49:50 pm



Title: iATKOS S3 v2 Hardware driver configuration
Post by: shedo on April 17, 2011, 12:49:50 pm
Hi all,
I'm looking for a few days to install iATKOS S3 v2 on my old pc but I can not find the optimal configuration of the driver during installation ...
Can you help me?

This is my computer:

Motherboard:
CPU Type Intel Pentium 4 541, 3200 MHz (16 x 200)
Motherboard Name ASRock 775Dual-VSTA (4 PCI, 1 PCI-E x16, 1 AGP, 2 DDR DIMM, 2 DDR2 DIMM, Audio, LAN)
Motherboard Chipset VIA Apollo PT880 Pro/Ultra
System Memory 2048 MB (DDR2-800 DDR2 SDRAM)
DIMM1: Kingston 99U5316-028.A00LF 1 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
DIMM3: Kingston 99U5316-028.A00LF 1 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
BIOS Type AMI (02/26/08)
Communication Port Unknown

Display:
Video Adapter ATI Radeon X1300 LE / X1550 (RV515)
3D Accelerator ATI Radeon X1300 LE / X1550 (RV515)

Multimedia:
Audio Adapter Realtek ALC888/1200 @ VIA VT8237A High Definition Audio Controller

Storage:
Disk Drive MAXTOR STM3320620A (320 GB, 7200 RPM, Ultra-ATA/100)
Disk Drive SanDisk Cruzer Pattern USB Device (3 GB, USB)
Optical Drive HL-DT-ST DVD-RAM GSA-H58N (DVD+R9:10x, DVD-R9:10x, DVD+RW:20x/8x, DVD-RW:20x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
SMART Hard Disks Status OK